Test Meter PRO Contractor's Safe Isolation Kit with Locks / Tags

Test Meter PRO Contractor's Safe Isolation Kit with Locks/Tags

The Test Meter PRO Contractor's Safe Isolation Kit builds upon the standard Safe Isolation Kit by adding a carefully selected range of contractor lock-off devices. It enables electricians to both prove a circuit is dead and physically secure the point of isolation before work begins. The kit includes the TMP900 voltage tester, TMP690 proving unit, premium case, MCB lock-off devices, safety padlock, lock-out hasp, warning tags and permanent marker.

Part number: TMPCONSIK

 Why Use This Kit?

HSE GS38 recommends using a proprietary two-pole voltage detector to establish the presence or absence of voltage and proving the tester before and after use using a proving unit. This kit brings together the equipment required to support that recognised safe isolation procedure.

Test Meter PRO Safe Isolation Product Range Comparison

FAQs

What is the prove-test-prove method?

Prove the tester on a proving unit, test the circuit, then re-prove the tester.

Why use a two-pole voltage tester?

GS38 recommends a proprietary two-pole voltage detector for proving dead rather than relying on a multimeter.

Who is this kit for?

Professional electricians, maintenance engineers, contractors and apprentices.

Why choose the Contractor's Kit?

It includes physical lock-off equipment so the point of isolation can be secured against accidental re-energisation.

 Typical Applications

• Consumer unit replacement
• Electrical installation
• Inspection & Testing
• Electrical maintenance
• EV charger installation
• Solar PV
• Commercial maintenance
• Industrial maintenance

Key Features

• Complies with HSE GS38
• Suitable for domestic, commercial & industrial work
• Includes lock-off devices and warning tags