Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

Trend S40 FiberMASTER Adaptive Clad Alignment Fusion Splicer Kit

Trend Networks
SKU: TRENDS40FIBERMASTER
  • Robust and reliable which allows for the instrument to be used across a plethora of environments without fear of damage or unreliable results
  • The Trend S40 FiberMASTER achieves maximum performance and industry leading repeatability over hundreds of splices
  • Optimised for use on Fibre to the Home (FTTH), Access Networks, as well as Enterprise and Campus Networks, in order to join two fibers
More Info
Typically ships in 1-3 working days

Trend S40 FiberMASTER Adaptive Clad Alignment Fusion Splicer Kit

The Trend S40 FiberMASTER Fusion Splicer offers superior splice performance in just 7 seconds, and offers industry-leading repeatability to ensure that the last splice taken will match the accuracy of the first. The Fusion Splicer is used to join two optical fibers together to create a single, long fiber. With fully automatic modes that are able to detect the fibre type and set the optimal splicing parameters, the S40 ensures minimum splice loss in real-time. With a robust and reliable design that allow for use in a plethora of real-world conditions, you can be sure that this instrument is up for the task at hand.

The Trend S40 FiberMASTER uses 4 motors for precision cladding alignment of any type of fibre, which offers fast splicing and dependable performance. It is optimised for Fibre to the Home (FTTH), Access Networks, and Enterprise and Campus Networks. With a data capacity of 240 splice/heat cycles, and the ability to store up to 8,000 results, repeated use is available, with a protective cover ensuring that the splicer is well protected. The interface is easy to use, with touchscreen and push buttons ensuring the tool is easily-navigable.

The S40 is supplied with a variety of accessories, such as a carry case for safe and efficient transportation, and cleaning instruments. On top of this, the user will receive replacement electrodes, and several other accessories to enhance the instrument.

The S40 and S6O Fusion Splicer Kits

The table below shows the key differences between the S40 and S60 models of the Fusion Splicer, so that you can make a decision about which of the two is right for you. For further information on each product's specification, check the specification page.

  S40 S60
Number of Motors 6 4
Typical Splice Time 7 seconds in fast mode 6 seconds in fast mode
Typical Heating Time 20s/40mm, 26s/60mm 18s/40mm, 20s/60mm
Camera Magnification 320X (X or Y views separately), 160X (X & Y views together)400X (X or Y views separately), 200X (X & Y views together) 400X (X or Y views separately), 200X (X & Y views together)
Display 4.3inch/109mm colour LCD, capacitive touch 5inch/127mm colour LCD, capacitive touch
Record Storage 8,000 loss results 10,000 loss results + 100 images
Operating Time Operating: 5 hours/Standby: 8 hours, Splices per charge: 240 splice/heating Operating: 5 hours/Standby: 8 hours, Splices per charge: 280 splice/heating
Electrode Durability >4,000 Arc discharges, User replaceable >5,000 Arc discharges, User replaceable
Temperature -10°C to 50°C / 14°F to 122°F -25°C to 50°C / -13°F to 122°F
Splicer Dimensions L x W x H 160 x 140 x 135mm, 6.3 x 5.5 x 5.3inches 155 x 144 x 155mm, 6.1 x 5.7 x 6.1inches
Splicer Weight with Battery, Excluding Case and Accessories 1.97kg, 4.34lbs 2.35kg, 5.18lbs

Trend part number: R301-S40K

Key Features

  • Used to join two optical fibers together to create a single, long fiber
  • Every splice will be as accurate as the other ones
  • Built for field use in a variety of real-world conditions
  • Industry leading with splice loss as low as 0.01dB
  • FiberMASTER achieves maximum performance and industry leading repeatability over hundreds of splices
  • Uses 4 motors for precision cladding alignment of any fibre type
  • 4.3" Colour LCD touchscreen display
  • Can store 8,000 results
  • Has a protective cover for use on a range of job sites
  • A USB port enables for software updates, the ability to download splice results, and a USB work light

What's In The Box?

  • FiberMASTER 4-Motor Fusion Splicer
  • Carry Case
  • Replacement Electrodes
  • Cooling Tray
  • Quick Reference Guide
  • Power Supply
  • Cleaver
  • Alcohol Dispenser
  • Cleaning Brush
  • Fibre Stripper
  • Drop Cable Stripper
  • Kevlar Shears
  • USB Work Light
  • Heat Shrink 60mm 50pcs + 40mm 50pcs
Specification
  • Supported Fibre Types - SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655), G.657
  • Fibre Cladding Range - 80 - 150μm
  • Fibre Coating Range - 160 - 3000μm
  • Typical Splice Loss - SM: 0.02dB, MM: 0.01dB, DS: 0.04dB, NZDS: 0.04dB
  • SM Mean Splice loss, 95% of splices - 0.0133 dB, 0.0118 - 0.0148 dB
  • Typical Return Loss - >60dB
  • Fibre Cleave Length - 250μm coated fibre: 5 - 16mm, 250 - 3mm coated fibre: 16mm
  • Splicing Programs - 40 preset + 60 custom
  • Operating Modes - Automatic/Manual
  • Heating Modes - Automatic Pre-Heat/Manual
  • Typical Splice Time - 7 seconds in fast mode
  • Typical Heating Time - 20s/40mm, 26s/60mm
  • Camera Magnification - 320X (X or Y views separately), 160X (X & Y views together)
  • Display - 4.3 inch/109mm colour LCD, capacitive touch
  • Record Storage - 8,000 loss results
  • Splice Loss Estimation - Yes
  • Tension/Pull Test - 1.8 - 2.2N
  • User Interface - Graphical touch screen and dedicated buttons for key functions
  • Battery - Capacity: 56.16Wh, Li-Ion, removable, Charge time: 8 hours, Supports on-board battery charging only
  • Operating Time - Operating: 5 hours/Standby: 8 hours, Splices per charge: 240 splice/heating
  • Power Supply - Input: 100-250VAC (50/60Hz), Output: 13.5VDC
  • Electrode Durability - >4,000 Arc discharges, User replacable
  • Environmental - Altitude: 0 - 5000m / 0 - 16,400ft, Temperature: -10°C to 50°C / 14°F to 122°F, Humidity: 0 - 95%, non-condensing, Wind: 15m/s, 54KPH, 33MPH max
  • Splicer Dimensions L x W x H - 160 x 140 x 135mm, 6.3 x5.5x5.3 inches
  • Splicer Weight With Battery, Excluding Case and Accessories - 1.97kg, 4.34lbs
  • Connectivity - USB Type A to download splice results and update software