Kane HUB-6 Kit Smart Refrigerant Charging Kit

Kane HUB-6 Smart Refrigerant Charging Kit

The Kane HUB-6 Smart Refrigerant Charging Kit includes a number of useful Kane devices suitable for use In HVAC applications. Within the kit are 2 x Kane WPCP wireless temperature pipe clamp probes, 2 x Kane WPP wireless pass through pressure probes, a Kane, WVG2 vacuum gauge and a Kane WOT2 outdoor condenser temperature probe. Using the kit allows for heat pump flow and retune testing, AC and refrigeration pressures and temperatures as well as superheat and Subsoil and test system evacuation. The HUB-6 is suitable for use with Kane Link analysers as well as the Kane 460 analyser. 

Kane WPCP2

The HUB-6 contains two Kane WPCP wireless clamp temperature probes, allowing for wireless measurements and displaying of flow and return measurements, boiler commissioning tests and Monobloc heat pumps. Connect the probes to the Kane Hub App or any Kane Link analysers, the probes can be used in tight spaces with pipe diameters up to 38mm. Temperatures can be measured from 0-80ºC from a line of sight up to 100m.

Kane WPP2

Featuring two Kane WPP2 Wireless pressure Probes that allow for the wireless testing of heat pumps, A/C and refrigeration system pressure tests. Superheat and sub cooling can also be calculated with a line of sight of 100m. The Kane WPP2 connects wirelessly to the Kane Hub App or Kane Link analysers.

Kane WVG2

The Kane HUB-6 kit includes a Kane WVG2 Wireless Vacuum Gauge the allows for the testing of heat pumps, A/C and refrigeration system evacuations to ensure moisture and non condensate removal. The gauge has a vacuum range of 20,000 microns with a 700psi maximum over range.

The WVG2 features a 45º coupler and nickel plated flare fitting. Oil contamination warning and sensor failure is also detected on the gauge. The magnetic hanger allows for hands free operation. The WVG2 is compatible with the Kane Hub App and Kane link Analysers with a range of 100m line of sight.

Kane WOT2

HUB-6 kit features a Kane WOT2 outdoor temperature sensor allowing for the testing of heat pumps, A/C and refrigerant condenser temperatures. Target heat pumps, A/C refrigeration superheat and subcool. The sensor allows for temperature measurements from 0 to 82ºC (32ºF to 180ºF) with a 100m line of sight range. Further features include measuring outdoor temperature measurements for target superheat calculations.

The Kane WOT2 has a magnetic hanger for hands free operation with two positions condenser side or top. The sensor is compatible with the Kane Hub App and Kane Link analysers.

Kane Hub App

The contents of the Kane Hub-6 kit are compatible with the Kane Hub App allowing users to connect and control your Kane devices. Using the app, technicians are able to see, save and share tests results and measure system pressures and temperatures.

The App allows for superheat and subcooling measurements to be calculated. Further testing includes the testing of vacuum with dual mode vacuum screen and evacuation target display and rise limit testing. Test results can be displayed in microns, Pa, mmHg and mBar, with the display rate of change and water saturation point displayed.

Key Features

• 2 x Kane WPCP Wireless Temperature Pipe Clamp Probes
• 2 x Kane WPP pass through pressure probes
• Kane WVG2 Vacuum Gauge
• Kane WOT2 Outdoor Condenser Temperature Probe
• Test heat pump flow and return
• A/C and refrigeration pressure and temperature testing
• Target AC and refrigeration superheat and subcool and test system evacuation
• Compatible with the Kane Hub App
• Use alongside Kane Link Analysers including Kane460