Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

Kewtech KEWEVSE EV Charging Point Adapter

Kewtech
SKU: KEWTKEWEVSE
  • Enables simple loop, RCD and RDCD testing
  • Simulates the presence of an electric vehicle
  • Compatible with Kewtech MFTs such as the KT66DL
More Info
In Stock - Available Next Day

Kewtech KEWEVSE EV Charging Point Adapter

The Kewtech KEWEVSE EV Charging Point Adapter is a comprehensive instrument built to provide operators with the ability to test EV charging points. As EV points become more and more prevalent, EVSE testing has become a crucial part of everyday life. This adapter when used in conjunction with a suitable Multifunction Tester, enables loop, RCD and Residual Direct Current Devices (RDCD) testing. By simulating the presence of a vehicle, the functionality of the EV supply equipment, including a PE fault, can be tested.

Compact and supplied with a handy carry bag, the KEWEVSE is compatible with a range of Kewtech MFTs featuring EV capabilities and features bright LED's for visiaul indication. When combined with the Kewtech KT66DL 12-in-1 Multifunction Tester, the Kewtech KEWEVSE EV Charging Point Adapter provides the user with a highly useful 6mA DC RCD Test

Kewtech EV Comparison

  Kewtech KEWEVA Kewtech KEWEVSE
Works with all makes and models of MFT’s ✔ ✔
Connection Type 2 charge points (Type 1 with additional adapter) ✔ ✔
Connects to the instrument with standard 4mm connectors ✔ ✔
Three phase charger compatibility ✔ ✔
Ability to connect to 10A load for testing purposes, if required ✔ ✔
Additional provision of a 13A socket for the instruments mains lead   ✔
Ability to inject CP/PE errors   ✔
Touch pad   ✔
Connectors to accept an Oscilloscope for diagnostic purposes   ✔
Compact with no cable ✔  
Single dial operation ✔  
Comms light- auto check of control pilot (CP) ✔  
Best option when commisioning is the primary service required ✔  
Best option when troubleshooting is the primary service required   ✔

Key Features

  • Allows for the testing of EV charging points
  • Enables Loop, RCD and RDCD testing with accompanying MFT
  • Includes PE Pre-Test
  • PP simulation & CP states A, B, C, D
  • CP Error / PE Error/ Earth fault
  • Bright LED provides indication of Phases
  • Suitable for Kewtech MFTs such as the KT66DL

Kewtech part number: KEWEVSE

Specification
  • Input Voltage: Max 250V (single phase) max 430V (three phase) 50/60Hz
  • Measurement Category: CAT II 300V
  • Mains socket rating: 250V/10A
  • Mains socket protection: Fuse T10A/250V
  • PP simulation: Open circuit, 13A, 20A, 32A, 63A
  • CP simulation: States A, B, C , D
  • Error simulation: CP error “E”, PE (earth fault) error
  • PE Pre-Test: Yes
  • Test connector type: IEC62196-2 Type 2 male
  • Test cable length: 25cm
  • Working temperature: 0 to 40ºC
  • Storage temperature: -10 to 50ºC
  • Humidity: 0-80% RH
Label Type Size Download
pdf Kewtech KEWEVSE EV Charging Point Adapter Datasheet pdf 342.8 KB Download