Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

Kewtech KEWEVA EV Charge Point Testing Adaptor

Kewtech
SKU: KEWTKEWEVA
  • Designed for use in both single and three phase charging equipment, giving accurate results with ease
  • The KEWEVA adaptor uses an IEC 62169-2 Type 2 connecter for EC charging units, aswell as utilising red LEDs for status
  • Working temperature of 0 - 40°C and a maximum input voltage of 250V (single phase)
More Info
In Stock - Available Next Day

Kewtech KEWEVA EV Charge Point Testing Adaptor

The Kewtech KEWEVA EV is an EV charge point adaptor that has been designed with the user experience in mind, allowing for simple single-dial operation. The adaptor works by simulating the presence of a car which in turn tests the functionality of the EV supply equipment. With a lower resistance design that ensures the highest quality when it comes to loop measurements, the KEWEVA also has an in-built CP auto check.

The KEWEVA Adaptor has no cable, meaning there is no risk of tangled wires during the testing process. Supplied with a durable carry case, the adaptor is suitable for single & three phase charging equipments, and uses standard 4mm connectors to do so. The user can confidently tell when a voltage has been applied, as a seperate RED LED will indicate this.

Kewtech EV Comparison

  Kewtech KEWEVA Kewtech KEWEVSE
Works with all makes and models of MFT’s ✔ ✔
Connection Type 2 charge points (Type 1 with additional adapter) ✔ ✔
Connects to the instrument with standard 4mm connectors ✔ ✔
Three phase charger compatibility ✔ ✔
Ability to connect to 10A load for testing purposes, if required ✔ ✔
Additional provision of a 13A socket for the instruments mains lead   ✔
Ability to inject CP/PE errors   ✔
Touch pad   ✔
Connectors to accept an Oscilloscope for diagnostic purposes   ✔
Compact with no cable ✔  
Single dial operation ✔  
Comms light- auto check of control pilot (CP) ✔  
Best option when commisioning is the primary service required ✔  
Best option when troubleshooting is the primary service required   ✔

Kewtech part number: KEWEVA

Key Features

  • Red LEDs will indicate live status per phase
  • A single rotary dial controls the CP status simulation, with standby, ready, and charging
  • Seperate RED LED indicates when the voltage is applied to output connectors
  • Auto check of 1kHz
  • IEC 62196-2 Type 2 connector for EV charging units
  • LED indication of phases
  • Type 2 male connector for EVSE connection
  • Cordless for ease of use
  • One of the smallest products available for EV point testing

What's In The Box?

  • Kewtech KEWEVA EV Charge Point Testing Adaptor
  • Hard Carry Case
  • Manual
Specification
  • Input Voltage -
    Max 250V (single phase)
    Max 430V (three phase) 50/60Hz
  • Measurement Category - BSEN 61010 CAT II 300V
  • Current Carrying - Max 10 A for intermittent testing purposes only
  • CP States simulation - A, B, C
  • EV Charger connection type - IEC62196-2 Type 2 Male
  • Working Temperature - 0-40°C
  • Storage Temperature - -10-50°C
  • Humidity - 0-80% RH
Label Type Size Download
pdf Kewtech KEWEVA EV Charge Point Testing Adaptor Datasheet pdf 129 KB Download