Drummond SMKIT5 Electricity Smart Meter Installation Kit

SKU: MARTSMKIT5
  • Non-contact voltage indicator with self-proving system included
  • Martindale VT7 single-pole voltage detector usable with protective gloves
  • Drummond MTL10 test lamp allows isolation of Cat IV supply side
More Info
In Stock - Available Next Day

Martindale SMKIT5 Smart Meter Installation Kit

The Martindale SMKIT5 Smart Meter Installation Kit has everything an electrician might need to safely isolate a circuit whilst installing a smart meter. Components include a non-contact voltage indicator, a single-pole voltage tester, a test lamp, a proving unit and a handy carry case for all the constituent parts of the kit.

The Martindale TEK101 is a handy non-contact voltage detector that can sense voltage between 180V to 600V AC with a unique integrated 50Hz proving unit which tests the sensor operation, battery and LEDs. When voltage is detected, a red LED illuminates and the detector emits a buzzer sound.

The single-pole Martindale VT7 is a contact voltage detector that indicates voltage between 50V and 600V with a bright red LED and an audible buzzer sound. It is perfect for using when wearing protective gloves and gauntlets so the user can always detect live panel casings with ease.

In order to test safe isolation on the supply side (Cat IV), a Drummond MTL10 test lamp is also provided. With a 360˚ LED display, the test lamp always shows if AC/DC voltage is present from 50V to 500V. A Martindale PD440 proving unit allows the user to verify the test lamp before and after use.

Finally, a combination soft carry case is provided for all the testers. A flap allows the proving unit to be used whilst remaining in the case.

Martindale part number: MARSMKIT5

Key Features

  • Martindale TEK101 Non-Contact Voltage Indicator
  • Martindale VT7 Single Pole Voltage Detector
  • Drummond MTL10 Test Lamp
  • Martindale PD440 Proving Unit
  • Combination soft carry case

What's In The Box?

  • Martindale TEK101 Non-Contact Voltage Indicator
  • Martindale VT7 Single Pole Voltage Detector
  • Drummond MTL10 Test Lamp
  • Martindale PD440 Proving Unit
  • Combination soft carry case
Specification

Martindale VT7

Electrical

  • Audible and visual indication
  • Voltage range: 50V - 600V AC rms.
  • Frequency range: 50 - 60Hz
  • Test current: <5μA

Environmental

  • Temperature (Operating & Storage): -10°C to 55°C
  • Humidity (Operating & Storage): ≤ 85% R.H.
  • Altitude: up to 2000m

General

  • Power: 9V, PP3 alkaline battery included (IEC 6LR61, NEDA 1604A)
  • Current consumption: 34mA max
  • Dimensions: 236(L) x 44(W) x 33(D) mm
  • Weight: 120g (battery included) approx

Safety

  • Conforms to BS EN61010-1 CAT IV 300V, CAT III 600V
  • Class II, Double Insulation
  • Pollution Degree: 2
  • IP rating: IP54
  • Water resistant

EMC

  • Conforms to BS EN61326-1

Drummond MTL10

  • Maximum Working Voltage: 500V AC, 750V DC
  • Voltage Ranges: 50, 100, 200, 400V AC/DC
  • Range Detection: Automatically
  • Response Time: <0.1s
  • Frequency Range: DC, 0-65Hz
  • Test Current (500V AC/DC): <3.5mA
  • Temperature Range: -10C to 55C
  • Humidity: max 85% rel.H
  • Measurement Category: CAT IV 600V, CAT III 1000V
  • Pollution Degree: 2
  • Protection Degree: IP67
  • Dimensions: 213 x 112 x 72mm
  • Weight: 320g

Martindale PD440

  • Output Voltage: 440V nominal
  • Operating Temperature:  -10°C to +40°C at max 70% RH
  • Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
  • Dimensions: 143 x 84 x 50mm
  • Weight: 400g approx including battery

Martindale TEK101

  • Voltage Range: 100-600V
  • Frequency Range: 50Hz to 50kHz
  • Integrated self test proving function sensitivity: Registers at 3mm for 100V, 50Hz, 23mm for 240V, 50Hz (distances are from the tip of the unit to a flat PVC twin core and earth cable suspended in free space)
  • Visual Indication: Red LED
  • Audible Indication: 2kHz tone
  • Battery low: Green LED
  • Operating temperature: 0°C to 40°C
  • Supply: 9V alkaline battery, MN1604 or equivelant (excluded)
  • Housing: Flame retardant ABS
  • Dimensions: 202 X 32 X 22mm
  • Weight: 140g approx (excluding battery)