Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

Megger EVT100X Electric Vehicle Tester with Bluetooth

Megger
SKU: MEGGEVT100X
  • All-in-one EV testing covering insulation resistance, low resistance bonding, continuity, diode testing, DC voltage and temperature
  • Bluetooth connectivity with CertSuite Asset for live result streaming, secure wireless transfer, traceable records and digital reporting
  • Rugged workshop-ready design with IP54 protection, CAT III 600 V safety rating and a full colour graphic display
More Info
Typically ships in 3-5 working days

Megger EVT100X Electric Vehicle Tester with Bluetooth

The Megger EVT100X Electric Vehicle Tester with Bluetooth is a handheld tester designed for testing electric vehicles and electric vehicle components. Built for EV manufacturers, workshops, service centres and maintenance teams, it provides a practical all-in-one solution for carrying out routine safety and diagnostic testing on hybrid and electric vehicles.

Designed with the requirements of UNECE R100 in mind, the EVT100X supports essential EV testing, including insulation resistance, low resistance bonding, continuity, diode testing, DC voltage measurement with polarity check and temperature measurement. This allows users to test high-voltage connectors, cables, insulation resistance, electrical bonding, DC voltage, temperature and diode performance using one instrument.

The EVT100X adds Bluetooth Low Energy connectivity for use with CertSuite Asset. This allows test results to be streamed live, stored against vehicles, components or assemblies, and used to support traceable, auditable EV testing records. CertSuite Asset can also help users review results in real time, retrieve stored results later and support documentation, certification and compliance workflows.

The tester can also be used fully as a standalone instrument. It includes internal storage for up to 256 date and time stamped test results, with the option to export data to USB. For workshop and field use, the EVT100X features a full colour graphic display, guided lead setup diagrams, live circuit detection, test inhibit functions, rugged over-moulded housing, IP54 environmental protection and CAT III 600 V safety protection.

Megger part number: 1017-029

Key Features

  • Handheld electric vehicle tester with Bluetooth
  • Suitable for electric vehicles and EV components
  • Designed for EV manufacturing, workshops, garages and service centres
  • Suitable for HEV, PHEV, BEV and FCEV vehicles
  • Designed with the requirements of UNECE R100 in mind
  • Insulation resistance testing up to 1 kV
  • Insulation resistance range up to 200 GΩ
  • Supports PI, DAR, timed testing and temperature compensation
  • Variable insulation test voltage from 10 V to 999 V
  • DC voltage measurement up to 1000 V with polarity check
  • Low resistance bonding testing using two-, three- and four-wire methods
  • Four-wire Kelvin low resistance testing from 1 mΩ to 10 Ω
  • Continuity testing from 0.01 Ω to 1 MΩ
  • Diode testing
  • Temperature measurement and insulation resistance compensation
  • Guard terminal to help reduce surface leakage current errors
  • Bluetooth Low Energy connectivity
  • CertSuite Asset support for live streaming, asset records and reporting
  • Stores up to 256 date and time stamped test results
  • USB export to mass storage device
  • Full colour graphic display with configurable backlight
  • Guided lead setup diagrams
  • Live circuit detection and test inhibit functions
  • CAT III 600 V safety protection
  • IP54 rated for protection against dust and moisture ingress
  • Rugged over-moulded housing
  • Supplied in a multipurpose industrial carry case

What's In The Box?

  • Megger EVT100X Electric Vehicle Tester with Bluetooth
  • Hook strap
  • Multipurpose industrial carry case
  • SP5 remote probe
  • Temperature probe, T type CAT III 600 V
  • Crocodile clips: red, black and blue
  • IR lead set
  • 3 x grabber clips: red, black and blue
  • 3 x 4mm test leads, 2m: red, black and blue
  • 3 x long reach test probes: red, black and blue
  • Kelvin clip lead set, CAT III 600 V
  • Kelvin probe lead set, CAT III 600 V
  • Replaceable Kelvin probe pins
  • Certificate of test
  • Certificate of calibration
  • 6 x AA rechargeable NiMH batteries, fitted
  • Battery charger
  • Quick start guide
Specification
  • Insulation Resistance (Volts / Accuracy) -
    -50V / 10GΩ ±2% ±2 digits ±4.0% per GΩ
    - 100V / 20GΩ ±2% ±2 digits ±2.0% per GΩ
    - 250V / 50GΩ ±2% ±2 digits ±0.8% per GΩ
    - 500V / 100GΩ ±2% ±2 digits ±0.4% per GΩ
    - 1000V / 200GΩ ±2% ±2 digits ±0.2% per GΩ
  • Polarisation Index (PI) – 10 min / 1 minute ratio
  • Dielectric Absorption Ratio (DAR) – User configurable 15s or 30s t1. Start time with t2 fixed at 60s
  • Guard Terminal Performance - <5% error at 500kΩ parallel circuit resistance with 100MΩ load
  • Resolution - 0.1kΩ
  • Short Circuit/Charge Current - 2mA +0% -50% (IEC61557-2)
  • Terminal Voltage Accuracy - -0% +2% ±2V
  • Test Current - 1mA at min. pass value of insulation to a max. of 2mA
  • Operation Range - 0.10MΩ to 1.0GΩ (IEC61557-2)
  • Leakage Current Display - 0.1uA resolution 10% (±3 digits)
  • Voltage Display - ±3% ±2 digits ±0.5% of rated voltage
  • Note – Above specifications only apply when high quality silicone leads are being used – as supplied with the instrument

Continuity

  • Measurement - 0.01Ω to 1MΩ (0 to 1000kΩ analogue scale)
  • Accuracy - ±3% ±2 digits (0 to 99.9Ω ), ±5% ±2 digits (100Ω - 500kΩ)
  • Test Current - 200mA (–0mA +20mA) (0.01 Ω - 4 Ω)
  • Polarity – Single or Dual (factory default) polarity
  • Lead Resistance - Null up to 10Ω
  • Selectable Current Limit – 20mA and 200mA

Voltmeter

  • Range – DC: 0-1000V
  • Accuracy - DC: ± 2% ±2 digits (0 - 1000V)
  • Diode Test - Diode test accuracy: ±2% ±2 digits 0.01V to 3.00V
  • Display Range – 0.00V to 3.00V

Temperature Measurement and Compensation

  • Thermocouple – Type T (Type K and Type J)
  • Thermocouple Range - -20°C to 200°C (4°F - 392°F)
  • Instrument Range - -20°C to 1000°C (4°F - 1832°F)
  • Instrument Resolution - 0.1°C (0.18°F)
  • Instrument Accuracy - ±1.0°C ±20 digits (1.8°F). (Basic accuracy stated assumes forward and reverse measurements.)

DLRO Four Wire Kelvin Low Resistance

  • Test Current – 200mA DC
  • Range - 1mΩ to 10Ω
  • Resolution - 0.01mΩ
  • Accuracy - ± 0.25% rdg. ± 10 digits, accuracy stated includes forward and reverse measurements.

Results Storage

  • Storage Capacity – 256 test results (date/time stamped)
  • Data Download – USB Type A (USB Mass Storage Device)

Power

  • Battery -
    - 6 x IEC HR6 1.2V NiMH fitted
    - Optional: 6 x IEC LR6 1.5V Alkaline (AA) IEC FR6 1.5V Lithium (LiFeS2)
  • Battery Life - 1200 insulation tests with duty cycle of 5s testing on 25s standby @ 500V into 0.5MΩ.
  • Battery Charging – Mains battery charger kit
  • Safety Protection – IEC61010-1 CAT III 600V
  • EMC – Industrial IEC61326, FCC ID: WAP3026, IC: 7922A-3026
  • Temperature Coefficient - <0.1% per °C up to 1GΩ

Environment

  • Operating Temperature Range - -10°C to 50°C (14°F to 122°F)
  • Storage Temperature Range - -25°C to 50°C (-13°F to 122°F)
  • Humidity – 90% RH at 40°C (104°F) max.
  • Calibration Temperature – 20°C (68°F)
  • Maximum Altitude – 3000m (9843ft)
  • IP Rating – IP54

Physical

  • Display – Full LCD colour screen with user configurable backlight
  • Languages – English, French, German and Spanish
  • Dimensions – 228 x 105 x 75mm (8.98 x 4.1 x 2.95in)
  • Weight – 0.93kg (2.02lbs)
  • Fuse – x 2 500mA (FF) 1000V 32 x 6mm ceramic fuse, high break capacity HBC, 30kA minimum. Glass fuses must not be installed.