Megger MIT230-HD Insulation and Continuity Tester with Rubber Boot

  • Can conduct a variety of tests and evaluations with high precision and accuracy
  • The MIT230-HD has the benefits of an LCD screen with clear and accurate measurement display
  • Designed to withstand consistent use on a wide range of job sites, ensuring reliability for professionals
More Info
In Stock - Available Next Day

Megger MIT230-HD Insulation and Continuity Tester with Rubber Boot

The Megger MIT230-HD Insulation and Continuity Tester is same as the Megger MIT230 with the addition of a protective rubber boot for the device. The MIT230 will find applications in electrical contracting, both on domestic and industrial systems as well as site maintenance and service departments. The MIT230 insulation and continuity tester is ideal for testing transformers, motors, generators, switchgear, panel building, domestic appliances, power tools as well as fixed electrical wiring systems. The compact nature of the MIT 230 makes it ideal for engineers that need to carry them for extended periods. The MIT230 offers a range of safety and operation features. The display provides a combination of digital readout and analogue display using Megger’s patented DART display technology. The Megger MIT230 has the benefits of an LCD screen with clear and accurate measurement display and an analogue pointer response for evaluating circuit charge and discharge characteristics. The digital/analogue insulation and continuity tester's housing is in tough ABS, designed to withstand the rigours of hard use and is small enough to drop into your pocket when not in use.

Automatic continuity testing is performed at 200 mA to ensure compliance with international requirements. The Megger MIT 230 1kV insulation and continuity tester will measure up to 100Ω on continuity, of which 0-10Ω is performed at greater than 200mA to meet international electrical testing requirements. Lead null is possible up to 9.99Ω of test lead resistance, ensuring the ability to null fused test leads as well as standard leads. The continuity buzzer operates at a 2 ohm threshold and provides a means of rapid cable testing and circuit identification, with voltage protection should you accidentally touch a live circuit. Insulation testing is possible up to 1000MΩ on all ranges up to 1000V. Auto discharge ensures all circuits are safely discharged after testing.

Megger MIT230 tester Key Features:

  • Insulation ranges of 250V, 500V and 1000V
  • Insulation testing to 1000 MΩ
  • Automatic continuity testing at 200 mA down to 0.01 Ω
  • Live circuit warning with voltage display and test inhibit
  • Test lead zero allows compensation for test lead resistance.
  • Digital/Analogue display
  • Automatic power-off if left unattended
  • Conforms to EN61557-1, CAT III 600V

What's In The Box?

  • Megger MIT230HD Insulation & Continuity Tester
  • Robust fitted carry case
  • Protective Rubber Boot
  • 2 Wire Test lead set with prods and clips
  • Calibration Certificate issued by Megger
  • 3 Year Manufacturers Warranty

Insulation Range

  • Nominal Test Voltage: 1000V, 500V, 250V (d.c.)
  • Measurement Range:
    10kΩ - 1000MΩ on all ranges
    Terminal voltage on open circuit (d.c.)
    -0% +25% of rated voltage
  • Test Current on Load: >1mA at minimum pass values of insulation as specified in BS 761, HD 384, IEC 364 and VDE 0413 part 1

Continuity Range

  • Measuring Range: 0.01Ω - 100.0Ω (0-50Ω on analogue scale)
  • Open Circuit Voltage: 5V ± 1V
  • Short Circuit Current: 205mA + 10mA - 5mA > 18mA (10-100Ω)
  • Accuracy (at 20°C):
    ± 0.01Ω to 9.99Ω ± 3% ± 2 digits
    10.0Ω to 99.9Ω ± 5 % ± 2 digits
  • Zero Offset Adjust: 0 to 9.99Ω
  • Continuity Buzzer: Operates at < 2Ω
  • Default Voltmeter: >25V a.c. or d.c. is applied display will operate as a voltmeter
  • Range: 25V to 600V @ 50/60Hz & d.c.

Digital/Analogue Insulation and Continuity Testers

  • Accuracy:
    25V to 450V a.c./d.c. ± 1% ± 1 digit
    450V to 600V a.c. ± 2% ± 1 digit
  • Test Inhibit: If more than 50V is detected, testing will be inhibited
  • Auto Power Down: Auto power down operates after 10 minutes if left in standby mode
  • Operating Temperature Range and Humidity:
    -10°C to +55°C
    93% R.H. at +40°C max
  • Storage Temperature Range and Humidity: -25°C to +65°C
  • IP Rating: IP40
  • Fuse:
    500mA (F) 600V, 32x6mm
    Ceramic HBC 50kA minimum
    Display shows if fuse is ruptured
  • Over-voltage Safety Category: Meets the requirements of IEC61010-1 CAT III 600V phase to earth
  • Automatic Discharge: After an insulation test the item under test will be discharged automatically. Any voltage present will be indicated on the display so that the discharge can be monitored
  • Power Supply:
    Battery 6 x 1.5V cells IEC LR6 type (AA Alkaline)
    Rechargeable NiMH cells may be used
  • Battery Condition: Battery condition is constantly shown on the display as a four section bargraph
  • Battery Life: 3000 consecutive tests (5 seconds per test) on any test using 2 Ah batteries
  • Weight: All units 530gms ± 5%
  • Dimensions: All units 195 x 98 x 40mm
  • EMC: In accordance with IEC61326-1