Megger RCDT310 RCD Tester

The easy to use Megger RCDT310 tests RCD trip times. Thick rubber armoured case, clear colour coded selectors and a large clear display.
More Info
In Stock - Available Next Day

Megger RCDT310 RCD Tester

The Megger RCDT310 RCD tester can perform 1/2I, 1xI and 5xI tests on RCDs rated at 30 mA, 100 mA, 300 mA, 500 mA & on general and selective (time delayed) RCD's. The trip times are displayed on the screen, the RCDT310 is Meggers budget RCD tester. If you would like a downloadable RCD tester that can also test programable RCD's we'd recommend the: Megger RCDT330.

  • Tests standard RCD's, DC RCD's & Selective residual current devices (RCD's)
  • 3 Phase safe
  • Weatherproof to IP54
  • 3 Year Megger warranty
  • Megger calibration certificate
  • Enables testing on 110 V centre tapped supplies
  • Tough rubber armoured case with built-in cover
  • Comes Supplied with a Megger Hard Carry Case FREE

What's In The Box?

  • Megger RCDT310 RCD Tester
  • Robust fitted carry case
  • Shoulder Strap
  • Mains Test Lead 
  • Calibration Certificate issued by Megger
  • Product documents CD
  • 3 Years Manufacturers Warranty

Power Supply

  • RCDT310 100 V - 280 V 45 Hz to 65 Hz
  • Batteries: 8 x 1,5 V cells IEC LR6 type (AA alkaline).
  • Rechargeable: 8 x 1.2 V NiCd or NiMH cells.
  • Battery Life: 2000 consecutive tests
  • RCD Test Ranges (to EN61557-6)

Test Current Accuracy

  • No Trip Test: (1/2I) –8% to –2%
  • Trip Test: (I, 5I) +2% to +8%
  • Trip Time: ±1% ±1ms

Voltage measurement - (RCDT330, RCDT320 & RCDT310)

  • Range ac: 0V - 300V 25Hz to 450Hz
  • Accuracy: ±2% ±2 digits

Fault (Touch) Voltage

  • Displayed range: 0 V to 50 V
  • Error: +5%/+15% ±0.5 V

Temperature and humidity

  • Operating Range: -5°C to +40°C
  • Operating Humidity: 93% R.H. at +40°C max.
  • Storage Range: -25°C to +70°C
  • Maximum altitude: 2000m
  • Environmental Protection: IP54

The Megger RCDT310 meets these Safety standards:

  • The requirements of IEC61010-1 Cat III 300V phase to earth.
  • IEC61557 Complies with the following parts of EN61557, Electrical safety in low voltage systems up to 1000 V ac and 1500 V dc - Equipment for testing, measuring or monitoring of protective measures.
  • Part1 - General Requirements
  • Part4 - Residual current devices
  • E.M.C.
  • In accordance with IEC61326-1
  • Weight: 980gms
  • Dimensions: 203x148x78 mm