Tramex RHP-SNW 4.5" Short Narrow RH Probe Din Connection

Tramex RHP-SNW 4.5" Short Narrow RH Probe

The Tramex RHP-SNW 4.5" Short Narrow RH Probe with its 4mm diameter is fully capable of capturing Relative Humidity (RH) readings in small or difficult to access crevices. Alongside RH, the probe also measures Temperature, Dew Point temperature and grains per ground (grams per kilo) humidity ratio. For getting between tiles and evaluating moisture conditions in wall/cavity structures within the building, this thin probe is ideal. Its best in class accuracy and high level of reliability, even at RH above 90% makes the probe a useful tool for any building survey professional or flood & water damage restoration job. The RHP-SNW has a temperature range of -40°C to 80°C, relative humidity range of 0 to 100% and temperature accuracy of ± 0ºC to 90.ºC

Fast and accurate, the RHP-SNW probe with Din connection is compatible with both the Tramex CMEX II and the MRH III non-destructive moisture meters. Robust and reusable with an extremely fast acclimation and temperature response time, the RHP-SNW can be calibrated by using the calibration check salts.

Should the probe be equipped with the Bayonet Connection option, it can be used in conjunction with both the Tramex CMEX5 Moisture Meter and the RHTX Feedback DataLogger.

Key Features

• 4.5" (110mm) probe for deep cavity inspection
• 4mm diameter
• Measures; Relative Humidity, Temperature, Dew Point temperature & grains per ground (grams per kilo)
• Relative Humidity range: 0% to 100%
• Temperature Range: -40°C to 80°C (-40°F to 176°F)
• Temperature accuracy: ±0ºC to 90 ºC (2º over 32ºF to 194ºF)
• Accuracy reliable even above Relative Humidity of 90%
• Fast acclimation and temperature response time
• Robust and reusable probe
• Suitable for building survey professionals
• Din connection - for Tramex CMEX II and Tramex MRHIII non-destructive moisture meters
• Calibration checks performed with calibration check salts

Tramex part number: RHP-SNW