Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

BAUR KSG200 HV/LV Cable Identifier – Mains Powered (for de-energised cables only)

BAUR
SKU: BAURKSG200
  • Used to identify de-energised single and multi-core cables, that are in a cable bundle or cable loom, with ease and high-accuracy
  • The KSG200 is for use on de-energised cables only, with the KSG200 T available to be used on live cables
  • The system comprises of both a transmitter, and a receiver with a flexcoupler, as well as a transport case for all components
More Info
Typically ships in 2-3 weeks

BAUR KSG200 HV/LV Cable Identifier – Mains Powered (for de-energised cables only)

The BAUR KSG200 HV/LV Cable Identifier is a powerful and accurate cable identification system which can be used to identify both single and multi-core cables in a cable bundle or loom. The KSG200 reduces the risk of cutting or disrupting a live phase, which eliminates the risk of miscutting, supply failures, or unnecessary repair costs associated with accidental damage. The system comprises of both a transmitter and receiver, with intelligent electronics enabling the communication between both components.

The KSG200 offers intuitive and user-friendly operation, with the ability for it be used without extensive training for the user. It is also supplied with a transport case, which enables safe transportation and the convenient storage of all parts of the instrument. The user can be certain that the KSG200 is well protected, and will provide industry-standard results and testing operations. With protection class II, and a measurement category of CAT IV/600V, the KSG200 is also available for use on live cables as the KSG200 T. See the comparison table below for more information on the key differences between the two models.

The KSG200 (Disconnected Cables) and KSG200 T (Live Cables) Comparison Table

  KSG200 KSG200 T
Pulse Voltage 300V 300V
Pulse Current Maximum 180A Maximum 180A
Pulse Sequence 15 Pulses per Minute 15 Pulses per Minute
Mains Voltage 115/230/240V, 50/60Hz 115/230/240V, 50/60Hz
Protection Class II II
Degree of Protection IP40 IP40
Cables to be Used On De-Energised Cables Only Live Cables

BAUR part number: KSG200

Key Features

  • Cable identification of de-energised cables
  • Suitable for both single and multi-core cables and branched networks
  • Automatic recording and analysis of transmitting pulses: amplitude, interval (time), and pulse direction (polarity)
  • Error-free detection of the pulse direction, even at a high loop resistance of up to 400 Ohm
  • High pulse current up to 180A
  • Fully automatic gain adjustment
  • Expert mode for manual gain settings for clear cable identification on compact substations or mixed cable routes
  • Signal uncoupling by means of a flexcoupler for large cable diameter of up to 250mm
  • Current measurement up to 199A
  • Essential for active occupational health and safety
  • Reliable and robust protection technology
  • Ergonomically designed receiver with integrated LCD display
  • No batteries required for the receiver

What's In The Box?

  • KSG 200 Transmitter
  • KSG 200 Receiver
  • Connection Cable, 2m, with Connection Clips
  • Mains Supply Cord, 1.8m
  • Transport Case for All Components
  • User Manual
Specification
  • Pulse Voltage - 300V
  • Pulse Current - Maximum 180A
  • Pulse Sequence - 15 pulses per minute

Power Supply

  • Mains Voltage - 115/230/240 V, 50/60Hz
  • External Supply - -
  • Rechargeable Battery - -
  • Voltage-Proof Output - -
  • Measurement Category - -
  • Protection Class - II
  • Degree of Protection - IP40

General Information on the Cable Identification Systems in the KSG 200 Series

  • Ambient Temperature (Operation) - -10°C to +55°C
  • Storage Temperature - -20°C to +50°C
  • Case Dimensions (W x H x D) - Approximately 594 x 174 x 435mm
  • Weight of Case with Transmitter and Receiver - Approximately 6.2kg (without battery), Approximately 7.7kg (with battery)
  • Safety and EMC - CE compliant in accordance with Low Voltage Directive (2014/35/EU), EMC Directive (2014/30/EU), Environmental Testing EN 60068-2-ff

Receiver KSG 200/KSG 200 T

  • Sensitivity
    With galvanic impulse coupling - 100% at a loop resistance of 400Ohm (I = 0.75A)
    With inductive impulse coupling - 100% at a loop resistance of <6 Ohm
  • Load Current Range - 0-199A ± 2%, 50/60Hz
  • Battery Life - Approximately 1.5h
  • Display - LCD Display
  • Power Supply - Automatic recharging in the holder of the transmitter
  • Degree of Protection - IP52
  • Dimensions (W x H x D) - Approximately 100 x 25 x 211mm
  • Weight -
    With flexcoupler Ø 150mm - Approximately 360g
    With flexcoupler Ø 250mm - Approximately 470g