Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

BAUR KSG200T HV / LV Cable Identifier – Mains Powered

BAUR
SKU: BAURKSG200T
  • Used to identify live single and multi-core cables, that are either in a bundle or cable loom, with ease and high-accuracy
  • The KSG200T is for use on both live and de-energised cables, with the KSG200 available should be on de-energised ones
  • The system comprises of both a transmitter, and a receiver with a flexcoupler, as well as a transport case for all components
More Info
Typically ships in 2-3 weeks

BAUR KSG200T HV / LV Cable Identifier – Mains Powered

The BAUR KSG200T HV / LV Cable Identifier is an extremely accurate and powerful cable identification system which is able to work on live cables, and can identify both single and multi-core cables in a cable bundle or loom. The KSG200T reduces the risk of cutting a cable or disrupting a live circuit, which can reduce unplanned downtime, unnecessary repair costs, and the risk of miscutting. The system comprises of both a transmitter and a receiver, with intelligent electronics enabling for the seamless communication between both of these instruments.

The SKG200T is able to provide the user with intuitive and simple operation, with the ability to be used without extensive training. It is also supplied with a transport case, which ensures that the instruments are safe during transportation. The user can be certain that their Cable Identifier is well-protected, and will provide them with industry-standard live-cable testing and results. With protection class II, and a measurement category of CAT IV/600V, the KSG200T is also available without the ability to test on live cables, as the KSG200. See the comparison table below for more information on the key differences between the two models.

The KSG200 (Disconnected Cables) and KSG200 T (Live Cables) Comparison Table

  KSG200 KSG200 T
Pulse Voltage 300V 300V
Pulse Current Maximum 180A Maximum 180A
Pulse Sequence 15 Pulses per Minute 15 Pulses per Minute
Mains Voltage 115/230/240V, 50/60Hz 115/230/240V, 50/60Hz
Protection Class II II
Degree of Protection IP40 IP40
Cables to be Used On De-Energised Cables Only Live Cables

BAUR part number: KSG200T

Key Features

  • Cable identification of live cables
  • Suitable for both single and multi-core cables and branched networks
  • Automatic recording and analysis of transmitting pulses: amplitude, interval (time), and pulse direction (polarity)
  • Error-free detection of the pulse direction, even at a high loop resistance of up to 400 Ohm
  • High pulse current up to 180A
  • Fully automatic gain adjustment
  • Expert mode for manual gain settings for clear cable identification on compact substations or mixed cable routes
  • Signal uncoupling by means of a flexcoupler for large cable diameter of up to 250mm
  • Current measurement up to 199A
  • Essential for active occupational health and safety
  • Reliable and robust protection technology
  • Ergonomically designed receiver with integrated LCD display
  • No batteries required for the receiver

What's In The Box?

  • KSG 200T Transmitter
  • KSG 200T Receiver
  • Connection Cable, 2m, with Connection Clips
  • Connection Set to Connect to Live LV Cables
  • Flexible Rod, Fully Insulated (for applying the flexcoupler to live cables)
  • Mains Supply Cord, 1.8m
  • Charger including Country-Specific Adaptor
  • Vehicle Charge Cable
  • Transport Case for All Components
  • User Manual
Specification
  • Pulse Voltage - 300V
  • Pulse Current - Maximum 180A
  • Pulse Sequence - 15 pulses per minute

Power Supply

  • Mains Voltage - 115/230/240 V, 50/60Hz
  • External Supply - -
  • Rechargeable Battery - -
  • Voltage-Proof Output - -
  • Measurement Category - -
  • Protection Class - II
  • Degree of Protection - IP40

General Information on the Cable Identification Systems in the KSG 200 Series

  • Ambient Temperature (Operation) - -10°C to +55°C
  • Storage Temperature - -20°C to +50°C
  • Case Dimensions (W x H x D) - Approximately 594 x 174 x 435mm
  • Weight of Case with Transmitter and Receiver - Approximately 6.2kg (without battery), Approximately 7.7kg (with battery)
  • Safety and EMC - CE compliant in accordance with Low Voltage Directive (2014/35/EU), EMC Directive (2014/30/EU), Environmental Testing EN 60068-2-ff

Receiver KSG 200/KSG 200 T

  • Sensitivity
    With galvanic impulse coupling - 100% at a loop resistance of 400Ohm (I = 0.75A)
    With inductive impulse coupling - 100% at a loop resistance of <6 Ohm
  • Load Current Range - 0-199A ± 2%, 50/60Hz
  • Battery Life - Approximately 1.5h
  • Display - LCD Display
  • Power Supply - Automatic recharging in the holder of the transmitter
  • Degree of Protection - IP52
  • Dimensions (W x H x D) - Approximately 100 x 25 x 211mm
  • Weight -
    With flexcoupler Ø 150mm - Approximately 360g
    With flexcoupler Ø 250mm - Approximately 470g