Test Meter QuickPAT100 PAT Tester

SKU: TMQP100
  • Designed for fast, simple, and affordable PAT testing
  • Covers all essential PAT testing functions
  • Compatible with BS EN 50699 an d 5th Edition IET Code of Practice
More Info
In Stock - Available Next Day
Choose Your Free Gift

Test Meter QuickPAT100 Pass/Fail PAT Tester

The Test Meter QuickPAT100 Pat Tester is an entry-level device designed for organisations that need a fast, simple, and affordable way to carry out routine PAT testing. It is the perfect choice for users who want straightforward appliance safety checks without complicated menus or advanced features.

Operating it is simple with its intuitive rotary switch, clear PASS/FAIL indication, and lightweight design. The QuickPAT100 covers all essential PAT functions, including 200mA earth continuity testing, insulation resistance at 250V or 500V DC, and substitute leakage testing for appliances that cannot be powered during testing. Full extension lead testing is supported, with polarity verification and L–N short-circuit detection ensuring cables and accessories are tested just as safely as appliances.

Test results are shown on a large backlit screen with green pass and red fail indications, helping users make quick decisions without needing electrical expertise. Built-in voltage measurement improves safety by confirming L–N, L–PE, and N–PE supply conditions before testing begins. Powered by 6× AA batteries, the tester offers up to 2,500 tests per battery set and stores 1,500 results internally.

The QuickPAT100 is fully compatible with the test limits set out in both the 5th Edition IET Code of Practice and the BS EN 50699 Recurrent Tests of Electrical Equipment standard. Simply change the result thresholds to match the guidance you wish to follow on the PAT tester, and it will automatically compare your measured results against the published limits, giving you a clear pass/fail outcome.

For more information about how the QuickPAT range can help you, be sure to check out our blog post.

Comparing QuickPAT100, 200 and 300 PAT Testers

Feature

QuickPAT100

QuickPAT200

QuickPAT300

Display Type

PASS/FAIL Only

Numerical Values

Numerical + Advanced

Earth Continuity

Insulation Resistance

Substitute Leakage

Differential Leakage

Touch Leakage

RCD Testing

USB Device Testing

3-Phase Leakage

✔ (with adapters)

Internal Memory

1,500 results

1,500 results

1,500 results

Ideal User

Low-volume testers

Contractors

Specialists/Engineers

Test Meter part number: HDTPAC

Key Features

  • Intuitive rotary switch operation
  • Simple PASS / FAIL result indication (Green illumination for PASS results and Red illumination for FAIL results)
  • Large backlit display
  • 200mA earth continuity testing
  • Insulation resistance testing at: 250V DC and 500V DC
  • Full extension lead testing supported
  • Polarity verification
  • Live–Neutral (L–N) short-circuit detection
  • Confirms: Live–Neutral (L–N); Live–Protective Earth (L–PE) and Neutral–Protective Earth (N–PE)
  • Powered by 6 × AA batteries
  • Up to 2,500 tests per battery set
  • Internal memory for up to 1,500 test results
  • Compatible with: 5th Edition IET Code of Practice and BS EN 50699 Recurrent Tests of Electrical Equipment
  • Portable and easy to carry

 

What's In The Box?

  • Test Meter QuickPAT100 Pat Tester
  • Product guide
  • Mains test lead
  • Earth bond test lead
  • Crocodile clip adaptor
  • 6 × AA batteries
  • Soft carry case
Specification

General Specifications

  • Test Appliances: Class I, II, III, extension cables / reels
  • Function Selector: Rotary switch with pointing LED, backlit symbols
  • Display: LCD – PASS/FAIL only (no numerical values displayed)
  • Display Backlight: White (standard), Green (PASS), Red (FAIL); ambient light sensor
  • Memory: 1500 measurements
  • Power Supply: 6× AA Batteries (1.5VIECLR06)
  • Battery Life: approx. 2500 tests
  • Auto Power Off: 2 minutes
  • RTC Battery: CR2032
  • Mains Supply: 230V AC, 50Hz
  • Measurement Category: CAT II 300V
  • Height Above Sea Level: up to 2000 m
  • Pollution Degree: 2
  • Protection Class: IP40
  • Dimensions: 255 × 115 × 60 mm
  • Weight: 990 g (with batteries)
  • Operating Temperature: 0–30°C (≤80% RH), 31–40°C (≤75% RH)
  • Storage Temperature: −25…+65°C (≤80% RH) without batteries
  • Fuses: F1+F2: F16A/250V, 5×20 mm ceramic, ≥500A breaking capacity
  • Standards: EN50678, EN50699, DGUV Reg.3, ÖVE/ÖNORM E 8701, NEN 3140, UK 5th Ed. CoP, EN61010-1, EN61010-2-030, EN61557-1/2/4/10/16

Earth Continuity – Protective Conductor Resistance

  • Measurement Range: 0.05–19.99 Ω
  • Resolution: 0.01 Ω
  • Accuracy: ±(5% + 2d)
  • Test Current: >200 mA into 2 Ω
  • Open Circuit Voltage: <5 V
  • User Pass/Fail Limits: 0.1, 0.2, 0.3, 0.4, 0.5 Ω

Insulation Resistance

  • Measurement Range: 0.1–19.99 MΩ
  • Resolution: 0.01 MΩ
  • Accuracy: ±(5% + 2d)
  • Test Voltages: 250V DC or 500V DC (+20%, −0%)
  • Measuring Current: >1 mA, <2 mA at 2kΩ
  • Factory Limits: Class I: 1 MΩ, Class II: 2 MΩ

Substitute Leakage Current

  • Measurement Range: 0.20–19.99 mA
  • Resolution: 0.01 mA
  • Accuracy: ±(5% + 2d)
  • Test Voltage: 40V AC, 50 Hz
  • Test Current: <10 mA into 2kΩ
  • Pass/Fail Limits: Class I: 3.5 mA or 5 mA, Class II: 0.5 mA or 5 mA

Voltage Measurement

  • Measurement Range: 5–270V AC
  • Resolution: 1V
  • Accuracy: ±(5% + 2d)
  • Measurements Shown: L–N, L–PE, N–PE
Label Type Size Download
zip QuickPAT Software Download zip 4.1 MB Download

Please see our terms and conditions for full details of TM Care & Protect.

Everything you’re likely to require for the next 3 or 5 years:

✅ Annual calibrations included
No further calibration costs for either 3 or 5 years

✅ Free collection and return for annual calibration
No hidden postage costs when it’s time for calibration

✅ ‘Zero-Downtime’ for the life of your care plan
Free loan equipment should your purchase ever need sending away for repair

✅ Anti-theft protection 
Each care plan includes a SmartTrace Forensic Marking kit that acts as a deterrent for your test equipment and other tools

✅ Instrument cleaning kit
Cleaning kit included with each TM Care & Protect plan

Our hope is that TM Care & Protect will bolster our commitment to support you throughout your journey with us, providing you peace of mind from the hassles of annual servicing, potential tool theft and loss of earnings.

Ensures complete reliability, minimised downtime and peace of mind. TM Care & Protect packages include:

✅ Annual Calibration
No further calibration costs for up to 5 years.

✅ Zero Unplanned Downtime
In case of any unforeseen repairs, we provide FREE loan instruments so you can continue working.

✅ Theft Deterrent Kit
Each care plan includes a SmartTrace forensic marking kit: The UK's most powerful theft deterrent. Use on your test equipment, van and tools.

✅ No Shipping Cost
Includes collection and return deliveries when it's time for calibration.

✅ Instrument Cleaning Kit
Avoid preventable issues by keeping your test equipment clean.

Our hope is that TM Care & Protect will bolster our commitment to support you throughout your journey with us, providing you peace of mind from the hassles of annual servicing, potential tool theft and loss of earnings.

Please see our terms and conditions for full details of TM Care & Protect.