Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

DiLOG DL9130EV Multifunction Tester

Di-LOG
SKU: DILOGDL9130EV
  • Top of the range Multifunction Tester from DiLOG with complete EVSE testing capabilities
  • Auto sensing high current 2 & 3 wire loop test
  • Auto EV Test Sequences and Auto Start Loop & Continuity Tests
More Info
In Stock - Available Next Day
Choose Your Free Gift
Test Meter PRO TMP775 Earth Leakage Clamp Meter
Test Meter PRO TMP775 Earth Leakage Clamp Meter
Free
£79.00
50m R2 Wander Lead
50m R2 Wander Lead
Free
£39.00
Test Meter PRO TMP901 Electricians Kit (FREE GIFT)
Test Meter PRO TMP901 Electricians Kit (FREE GIFT)
Free
£28.95

DiLOG DL9130EV Advanced 18th Edition Multifunction Tester

The DiLOG DL9130EV Advanced 18th Edition Multifunction Tester is specifically designed to support those electricians who offer EV charge point installation services. Amongst its features, the DL9130EV sports some new functionalities that are critical in ensuring safe EVSE installation including full 6mA pure DC test for RDC-DD verification, EV testing sequence for verifying DC protection and type A RCD protection. In addition, the newly introduced Rmax and Zmax features will automatically capture maximum values for R1+R2 continuity tests and Zs tests respectively and display them upon test completion.

Also new within DiLOG’s 18th Edition MFT range is the inclusion of a colour RGB display, able to visually indicate potential pass/fail conditions. The screen presents values using large and clear digits and is fully backlit. The tactile rotary dial and sizeable function buttons allow for easy option/mode selection, even when using a gloved hand.

An auto sensing intelligent high current 2 and 3 wire loop test enables this MFT to detect when users are performing a 2 wire or 3 wire loop/PSCC measurement without the need for mode selection. Likewise, the auto start continuity test feature provides additional automation for further ease of use. Insulation measurement are possible using 250, 500 and 1000V test voltages.

The perfect tool for EV installation testing, this MFT offers great value and a variety of innovative features ready for use and allows for the safety and operational performance of each install to be assessed in line with BS EN 61557 standards.

Below, you will find a comparison table outlining the key differences between recent DiLOG MFT models, helping you to make the most informed purchasing decision.

  DL9110 DL9118 DL9120 DL9130EV
Continuity Test ✔ ✔ ✔ ✔
15 mA/200mA Selectable Current       ✔
R Max (Max R1+R2 recording)       ✔
Insulation Test 250V, 500V 250V, 500V, 1000V 250V, 500V, 1000V 250V, 500V, 1000V
Loop Test (3-wire no-trip) ✔ ✔ ✔ ✔
2-Wire Loop Test     ✔ ✔
Auto Start Loop & Continuity ✔ ✔ ✔ ✔
Auto Start PFC/PSC (L-PE/L-N)     ✔ ✔
Z Max       ✔
PFC and PSC Fault Current(L-PE/L-N) ✔ ✔ ✔ ✔
Phase-Phase Line Test (L-L)   ✔ ✔ ✔
RCD Test (AC, A, S-type) ✔ ✔ ✔ ✔
Auto RCD Test ✔ ✔ ✔ ✔
RCD Ramp Test ✔ ✔ ✔ ✔
6 mA RDC-CC (EVSE)       ✔
Auto EV RCD Test Sequence       ✔
RCD Test Type B     ✔ ✔
Phase Rotation   ✔ ✔ ✔
Intelligent Full Range Protection ✔ ✔ ✔ ✔
Colour RGB display ✔ ✔ ✔ ✔
Colour change indicates error ✔ ✔ ✔ ✔
Remote Test Probe Include   ✔   ✔
Includes calibration certificate ✔ ✔ ✔ ✔

What's In The Box?

  • Di-LOG Advanced EV 18th Edition Multifunction Tester
  • Padded Neck Strap
  • Professional toolbox style carry case
  • Mains leads
  • 1.2M blue test lead
  • 1.2M red test lead
  • 1.2M green test lead
  • Blue crocodile clip
  • Red crocodile clip
  • Green crocodile clip
  • MN1500 (AA) 1.5v batteries x 6
  • Operating instruction manual
  • Calibration certificate
Specification

    Voltage

    • Display range: 0V - 480V
    • Measuring range: 0V - 480V
    • Resolution: 1V
    • Voltage accuracy: +/- 5% +/- 2digits
    • Frequency range: 45.0Hz – 65.0HzV
    • Frequency accuracy: +/- 1.0Hz

    Continuity

    • Display Range (200mA): 0.01Ω to 2000Ω
    • Measuring Range (200mA): 0.10Ω to 2000Ω
    • Accuracy: +/- 2% +/- 5 digits
    • Resolution: 0.01Ω to 19.99Ω, 20.0Ω to 199.9Ω, 200Ω to 2000Ω
    • Test voltage: >4Vdc >25Vdc Open Circuit
    • Test current: >200mA
    • Display Range (15mA): 0.01Ω to 200Ω
    • Accuracy: +/- 2% +/- 5 digits
    • Resolution: 0.01Ω to 19.99Ω, 20.0Ω to 199.9Ω/>4Vdc >25Vdc Open Circuit/>15mA
    • Compliance: IEC61557-4 and IEC61557-10

    Insulation

    • Display range: 0.01MΩ to 200MΩ
    • Display range: 0.05MΩ to 200MΩ
    • Insulation: +/-5% +/-5 digits
    • Resolution: 0.01MΩ to 1.99MΩ, 2.0MΩ to 19.9MΩ, 20MΩ to 200MΩ
    • Alarm warning: <1MΩ Screen & Audible
    • Test voltage: 250/500/1000V
    • Test voltage specification: -0% +20% (open circuit)
    • Test current: 1mA into UN (1000Ω/V)
    • Compliance: IEC61557-2 and IEC61557-10

    No Trip Loop Impedance

    • Supply voltage: 195-253V, 45Hz – 65Hz
    • Display range: 0.01Ω to 2000Ω
    • Measuring range: 1.00 to 1999Ω (non-trip)
    • Accuracy: +/-5% +/-12 digits (to 20Ω) +/-5% +/-5 digits (to 2000Ω)
    • Resolution: 0.01Ω to 9.99Ω, 10.0Ω to 99.9Ω, 100Ω to 2000Ω
    • Test current: <15mA RMS

    High Current Loop Impedance

    • Supply voltage: 195-253V, 45Hz – 65Hz
    • Display range: 0.01Ω to 2000Ω
    • Measuring range: 0.10Ω to 1999Ω (high current)
    • Accuracy: +/-5% +/-12 digits (to 20Ω) +/-5% +/-5 digits (to 2000Ω)
    • Resolution: 0.01Ω to 9.99Ω, 10.0Ω to 99.9Ω, 100Ω to 2000Ω
    • Test current: 3A RMS

    Loop Test PFC Measurement

    • Display range: 0.1A to 26.0kA
    • Accuracy: +/-5%  +/-5 digits
    • Resolution: 0.1A to 999.9A, 1.0kA to 26.0kA

    High Current Line Impedance

    • Display range: 0.01Ω to 2000Ω
    • Measuring range: 0.10Ω to 2000Ω
    • Accuracy: +/-5% +/-5 digits
    • Resolution: 0.01Ω to 9.99Ω, 10.0Ω to 99.9Ω, 100Ω to 2000Ω
    • Supply voltage: 195V – 253V, 328V – 480V
    • Test current: 3A RMS Peak

    Line Test PSC Measurement

    • Range: 0.1A to 26.0kA
    • Accuracy: +/-5%  +/-5 digits
    • Resolution: 0.1A to 999.9A, 1.0kA to 26.0kA

        • RCD Trip Time Test

        • Supply voltages: 195-253V, 45Hz – 65Hz
        • Nominal test current: 10mA/30mA/100mA ( ½ , 1, 5 I∆n), 300mA/500mA ( ½, 1 I∆n), Variable Mode
        • Variable RCD test: 1mA – 500mA
        • Test current accuracy: -0% +10% at I∆n and 5I∆n, -0% +10% at ½ I∆n
        • Trip time ranges: 0 to 2000ms ½ I∆n, 0ms - 300ms I∆n general, 0ms - 500ms I∆n selective, 0 to 40ms 5 I∆n
        • Trip time accuracy: +/- 5% +/- 2 digits
        • Nominal test current: 10mA/30mA/100mA ( ½ , 1, 5 I∆n), 300mA/500mA ( ½, 1 I∆n)
        • Compliance: IEC61557-6 and IEC61557-10

        RDC-DD Trip Time Test

        • 195-253V, 45Hz – 65Hz
        • 6mA
        • -0% +10%
        • 0 to 10000 I∆n
        • +/- 5% +/- 2 digits
        • 2mA – 10mA
        • IEC61557-6 and IEC61557-10

        RDC (Ramp) Trip Current Test

        • Range: 0.5 I∆n to 1.1 I∆n
        • Accuracy: +/-5% of the expected current
        • Step Size: 0.1*∆n
        • Step duration: 300ms
        • Compliance: IEC61557-6 and IEC61557-10

        Additional Data

        • Weight: 1360g
        • Dimensions: Width 236mm, Depth 130mm, Height 91mm
Kit Option
DiLOG DL9130EV Multifunction Tester & EVSE Adaptor Kit
£999.00
In Stock - Available Next Day
More Info
  1. Kewtech R2 Socket Adaptor
    Kewtech R2 Socket Adaptor SKU: KEWTR2
    £19.00 (ex VAT)
    £22.80 (inc VAT)
  2. Kewtech KT103 Wall Socket Checker
    Kewtech KEWCHECK 103 Socket Tester SKU: KEWTKT103
    £14.00 (ex VAT)
    £16.80 (inc VAT)
  3. Kewtech Lightmate Kit - All 5 Lightmates
    Kewtech Lightmate Kit - All 5 Lightmates SKU: KEWTLIGHTMATEKIT
    £55.00 (ex VAT)
    £66.00 (inc VAT)
  4. Kewtech Testing Accessory Kit 1
    Kewtech TK1 Electrical Testing Accessory Kit SKU: KEWTACCKIT1
    £155.00 (ex VAT)
    £186.00 (inc VAT)
  5. Test Meter PRO TMP775 Earth Leakage Clamp Meter
    Test Meter PRO TMP775 Earth Leakage Clamp Meter SKU: TMP775
    £79.00 (ex VAT)
    £94.80 (inc VAT)
  6. Dilog DL6799 CombiVolt 5 True RMS Electrical Tester
    DiLOG DL6799 CombiVolt 5 True RMS Electrical Tester SKU: DILOGDL6799
    £89.00 (ex VAT)
    £106.80 (inc VAT)
  7. Dilog DLLOC1 18th Edition Lockout Kit
    DiLOG DLLOC1 Lockout Kit SKU: DILOGDLLOC1
    £22.49 (ex VAT)
    £26.99 (inc VAT)
  8. Dilog DLLOC2 18th Edition Domestic Lockout Kit
    DiLOG DLLOC2 Domestic Lockout Kit SKU: DILOGDLLOC2
    £35.99 (ex VAT)
    £43.19 (inc VAT)
  9. Dilog DLLOC3 18th Edition Professional Lockout Kit
    DiLOG DLLOC3 Professional Lockout Kit SKU: DILOGDLLOC3
    £50.24 (ex VAT)
    £60.29 (inc VAT)
  10. Dilog DL6518 Earth Leakage Current Clamp Meter
    DiLOG DL6518 Earth Leakage Current Clamp Meter SKU: DILOGDL6518
    £120.00 (ex VAT)
    £144.00 (inc VAT)
  11. Dilog CombiVolt Voltage Indicator & Proving Unit Kit DLPK6780
    DiLOG DLPK6780 CombiVolt 1 Voltage Indicator Proving Unit Kit SKU: DILODLPK6780
    £109.00 (ex VAT)
    £130.80 (inc VAT)
  12. Dilog PU690 690V AC Proving Unit
    DiLOG PU690 690V AC Proving Unit SKU: DILOPU690
    £62.00 (ex VAT)
    £74.40 (inc VAT)
  13. HandyMAN R1 + R2 Jump Leads
    R1 + R2 Jump Leads SKU: HANDTEKJUMP
    £12.50 (ex VAT)
    £15.00 (inc VAT)
  14. Dilog DL107 1000V Non-Contact Voltage Detector
    DiLOG DL107 1000V Non-Contact Voltage Detector SKU: DILOGDL107
    £14.99 (ex VAT)
    £17.99 (inc VAT)
  15. Dilog DL108 Industrial 1000V Non Contact Voltage Detector
    DiLOG DL108 Industrial 1000V Non Contact Voltage Detector SKU: DILOGDL108
    £22.49 (ex VAT)
    £26.99 (inc VAT)
  16. Dilog DLPK6790 CombiVolt 2 Voltage Indicator Proving Unit Kit
    DiLOG DLPK6790 CombiVolt 2 Voltage Indicator Proving Unit Kit SKU: DILODLPK6790
    £118.00 (ex VAT)
    £141.60 (inc VAT)
  17. 50m R2 Wander Lead
    50m R2 Wander Lead SKU: TMPTEK50
    £39.00 (ex VAT)
    £46.80 (inc VAT)