Fluke 1664FC Multifunction EVSE Test Kit

Special Offer: For a limited time only, purchase the Fluke 1664FC Multifunction EVSE Test Kit at a reduced price.

Fluke 1664FC Multifunction EVSE Test Kit

The Fluke 1664FC Multifunction EVSE Test Kit checks the functionality and the safety of electric vehicle charging stations using the Fluke 1664FC Multifunction Tester and the Fluke FEV300 EV Charging Station Test Adaptor with Type 2 Connector

Fluke 1664FC Multifunction Tester

The Fluke 1664FC when used alongside an adaptor such as Fluke FEV300, tests can be performed on EV charging stations DC protection devices using the RCD type B (smooth DC Currents) VAR mode. This generators the test currents for RCD type A-EV or RDC-DD acc can test according to IEC 62955 (6/60/200 mA and ramp <2 to 6 mA ramp) safety standards. This allows the operator to quickly and easily perform additional testing of 6mA DC RCD monitors on charging points.

The Fluke 1664 is a safe and efficient electrical testing tool capable of conducting a number of tests including True-RMS AC voltage, resistance, loop and line impedance, tripping speed, prospective earth fault current, earth resistance and RCD/FI tripping current. With a CAT III 500V over voltage protection and earth Volt Touchpad able to detect raised earth voltages (>50V) highlighting potentially dangerous test situations.

The Fluke 1664 is compatible Fluke Connect technology allowing users to stream test results straight to a smart device and Fluke Cloud database for storage of test results which can be shared with customers or colleagues at any moment.

With its large LCD display and many time saving features, such as auto-testing for line impedance, RCD trigger test and insulation tests, the Fluke 1664FC is a safe and accurate electrical testing tool to test electrical systems.

Fluke FEV300 EV Charging Station Test Adaptor with Type 2 Connector

The Fluke FEV300 EV Charging Station Test Adaptor with Type 2 Connector when used alongside then Fluke 1664FC Multifunction Tester allows a user to test the performance and safety of electric vehicle charging points. The adaptor imitates an electric vehicle opening a charging cycle, activating voltage and current output. The user is able to perform tests on charging stations in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722 standards.

The FEV300 allows for a number of tests to conducted including: PE Pre-Test, Proximity Pilot (PP) State, Control Pilot (CP) State and phase indication test. The FEV300 boasts a number of terminals L1, L2, L3, N, and PE allowing for the user to connect Fluke measurement instruments with the CP signal output terminal allowing for the user to check the communication between the adaptor and charging station.

TruTest™ Software

The Fluke 1664 Multifunction EVSE Test Kit is compatible with the Fluke TruTest™ software providing a hassle free data management and reporting solution. The TruTest™ software allows a user to quickly and easily import test measurement data and results from the test instruments, manage files and manually enter data if needed. Easy to understand reports can be produced to share with colleagues and customers.

Fluke 1664FC Multifunction Tester Key Features

• Insulation test voltages of 50V, 100V, 250V, 500V and 1000V DC
• Measurement of AC voltage, insulation resistance, loop and line impedance (ZI)
• Measurement of prospective earth fault current, tripping speed, earth resistance, and RCD/FI tripping current
• Continuity testing, RCD testing, and ramp testing
• Time-saving auto-test function
• Insulation PreTest detects appliances to avoid damage
• Earth Volt Touchpad detects high earth voltage
• Cat III to 500V, Cat IV to 300V Safety ratings
• Fluke Connect and FlukeCloud connectivity with smartphones
• Supplied with all necessary accessories including a remote probe and an FTP fused test probe set
• Well-built with light, portable design

Fluke FEV300 EV Charging Station Test Adaptor with Type 2 Connector key Features

• Suitable for vehicle charging stations with charging mode 3
• Fits charging stations with EV
• PE Pre-Test safety feature where the PE conductor will be tested for possible presence of dangerous voltage against earth
• Proximity Pilot (PP) state 'Cable simulation", with PP state rotary switch the adaptor that can simulate various current capabilities of charging cables
• Control Pilot (CP) state "Vehicle Simulation" with CP State rotary switch selector all charging states can be simulated
• Separate phase indication by three LED lamps to easily check if voltage is present at the charging output
• Measuring terminals L1, L2, L3, N and PE to connect the test device liker installation tester with the ability to perform safety and functional tests.
• Compatible with a number of Fluke test and measurement equipment
• Tests in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722 standards