Fluke 28 II IP67 Industrial Multimeter

Fluke 28 II IP67 Industrial Multimeter

With an IP67 rating, the Fluke 28 II Digital Multimeter is designed for outdoor use and can withstand a drop of up to 3m. It measures a range of electrical variables including AC/DC voltage (1000V), AC/DC current (10A), resistance (50MΩ), capacitance (9999µF), and frequency (199.99kHz). Furthermore, the 28 II can measure temperature between -200˚C and +1090˚C and these parameters can be measured to very high resolutions such as 0.1µA and 0.1Ω which allow inspections of flame detectors, thermistors, and more.

True RMS measurement aids accuracy when measuring non-linear outputs and a low pass filter combines with a unique measurement technique for accurately assessing ‘noisy’ electrical systems like motor drives. The relative mode removes test lead resistance from the equation for low resistance measurement and, finally, the Fluke 28 II can be used for diode and continuity testing.

The sturdy design of the Fluke 28 II means it is suitable for the most challenging of industrial environments. In addition to its IP67 weatherproof rating, the device is MSHA-approved and has a wide operating temperature range of -15˚C to +55˚C (-40˚C for 20 mins max./ operating humidity of 95%). The input safety ratings of Cat III to 1000V and Cat IV to 600V provide further testimony to the 28 II’s usability in potentially hazardous settings. It can even withstand volt spikes up to 8000V in case of faults or load switching on heavy-duty circuits.

All results are shown on the Fluke 28 II’s high resolution screen which has a backlight for use in the dark, as do the push button controls. The device is capable of min/max/avg recording as well as peak hold and AutoHold to provide a comprehensive picture of system performance.

The Fluke 28 II is the ideal multimeter for working in challenging environments and comes provided with a type K thermocouple, test probes, test leads and crocodile clips.

Fluke part number: 28II

Key Features

• AC/DC voltage up to 1000V
• AC/DC current up to 10A
• Resistance up to 50MΩ
• Capacitance up to 9999µF
• Frequency up to 199.99kHz
• Temperature from -200˚C to 1090˚C
• High resolution measurement
• True RMS measurement for AC values
• Low pass filter and unique ‘noisy’ measurement technique
• Diode and continuity testing
• Test lead resistance compensation
• IP67 dust and waterproof rating
• MSHA approved
• Extended operating temperature range
• Cat III to 1000V and Cat IV to 600V
• 3m drop tested
• High resolution screen
• Auto hold, min/max/avg, peak hold
• 800-hour battery life