Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

TPI 9041 Ultra II Vibration Analyser

TPI
SKU: TPI9041
  • Calculates timeframe in which a problem may result in system failure
  • Frequency range from 2Hz to 10kHz with 0.2Hz resolution
  • Automatic detection of imbalance, misalignment, looseness and bearing faults
More Info
Discontinued

TPI 9041 Ultra II Vibration Analyser

Please note this product has been discontinued

The TPI 9041 Ultra II Vibration Analyser is a highly advanced vibration meter and analyser that can be used to automatically detect production issues such as imbalance, misalignment, looseness and bearing defects as well as assessing machinery, ISO vibration and lubrication. The frequency range goes from 2Hz to 10kHz with extremely high resolution of just 0.2Hz whilst a dynamic range of 96dB (±50g) allows expression of vibration amplitude in g, and velocity. A tachometer and an accelerometer are supplied as standard to take both spped and vibration measurements.

Through vibration monitoring, its clever software allows it to accurately predict the timeframe of a problem becoming a failure whilst the internal monitoring instrument can monitor bearing and gear wear from three channels at once. Correction of some of the more common vibration faults is also possible with the TPI Ultra II. This includes single plane balancing and dual-plane balancing when using an optional accelerometer.

C-Trend software comes included as standard with the TPI Ultra II and this opens up several additional possibilities. For example, sites, assets and measurement data are displayed in a handy tree structure whilst a colour-coded alarm system indicates the severity of problems. The user can home in on any particular part of the frequency spectrum or time period and also use RFID tags to identify measurement points. The software can even produce automatic reports and e-mail alerts for balancing. Storage of full measurement history makes monitoring plants more thorough and easier.

Alongside the impressive measurement and analysis capabilities of the TPI Ultra II, the interface is also very simple as the analyser has a clear touch screen with push buttons and intuitive operation. The IP68 case makes the instrument completely submersible and very sturdy whilst the light weight and small size mean it is easy to transport and handle.

TPI part number: 9041

Key Features

  • Automatic detection of common faults
  • Single and dual plane balance correction
  • Lubrication and machinery testing
  • Calculation of failure timeframe
  • Frequency range: 2Hz to 10kHz (0.2Hz resolution)
  • Monitoring of gear and bearing degradation
  • C-Trend software monitors trends and history
  • Automatic reports and e-mail alerts
  • IP 68 ingression protection rating
  • Clear, touch-screen interface
  • Tachometer and accelerometer included as standard

What's In The Box?

  • TPI 9041 Ultra II Vibration Analyser
  • Instruction manual
  • Tachometer
  • Accelerometer (one)
  • Cables
  • Tachometer mount adapter
  • Carrying case with shoulder strap
Specification
  • Size: 220 mm x 95mm x 45mm
  • Weight: 500g (not including accelerometer)

Environmental

  • Water: ................MIL-STD-810F, Method 512.4 IP68 sealed against accidental immersion
  • Drop:..................MIL-STD-810F, Method 516.5, Procedure IV 26 drops from 1.22 m; 6 additional drops at –20º; 6 additional drops at 60º
  • Operating: ..........-30° to 65°C
  • Storage: ............-40° to 70°C
  • Humidity: ..........MIL-STD-810F, Method 507.4
  • Sand & Dust: ....IP68, MIL-STD-810F, Method 510.4, Procedures I & II
  • Power supply: Rechargeable battery (charger included)
  • Battery life: Typically 20 hours operating time depending on backlight usage.
  • Frequency ranges: 2 Hz to 1 kHz; 2 Hz to 10 kHz
  • Frequency resolution: Up to 0.02 Hz; 400, 800, 1600, 3200, 6400,12800, 25,600 or 51,200 lines FFT
  • Displayed Amplitude Units: Acceleration in g; velocity in mm/s (or inches/s); bearing noise in BDU; displacement in Microns/Mils
  • Displayed Frequency Units: Hertz (Hz), RPM or CPM
  • Dynamic range: 96dB; +/- 50g to +/- 0.001g with standard accelerometer
  • Auto set up of VA diagnostic bands: Instability, unbalance, misalignment & looseness
  • Envelope demodulation filters: Fully user selectable high pass and low pass filter cut off frequencies
  • IEPE accelerometer interface: Constant current accelerometer power supply (+20 volts @ 2mA) can be switched off for use with BNC output control panels
  • Numeric Keypad or Touch screen operation: Stylus free collection of maintenance data using numeric key pad or by touching screen
Label Type Size Download
pdf TPI 9041 Datasheet pdf 303.5 KB Download