KANE 460 Flue Gas Analyser with CPA1 Kit 2

KANE 460 Flue Gas Analyser with CPA Kit 2

The KANE 460 Flue Gas Analyser with CPA Kit 2 is a comprehensive and portable gas analysis kit that is ideal for a wide range of applications, including heating, ventilation, air conditioning, and refrigeration (HVAC&R). The kit includes a number of features that make it an essential tool for professionals in these industries, including: These include a combustion gas leak detector, a general purpose temperature probe, 2 x wireless clamp on proves, and a ASP3 cooker, fire and grill appliance testing probes. The kit also includes a number of other accessories, such as a protective Kane backpack and a Kane IRP3 wireless printer.

Kane 460 Flue Gas Analyser

The Kane 460 Flue Gas Analyser allows the user to install, commission and service boilers, heat pumps, A/C and refrigerant systems. Both domestic and commercial heating and water systems can be tested as well as safety checks which can determine if CO is present in a room or around any appliance.

Using the Kane 460 operators are able to perform sweep and CO migration tests when boilers are commissioned, as well as measuring a building IAQ and ventilation.

The Kane 460 provides users with a number of test readings that it can calculate and measure a wider range of applications including:

• CO 0-10,000 ppm H2 compensated with over range protection
• O2 0-21%
• NO 0-5,000ppm (option)
• Temperature inlet/flue gas, differential pressure/ambient
• High accuracy differential pressure meter +/- 160mba
• Calculate CO2 0-99%
• Calculate the CO/CO2 ratio
• Excess air
• A/C and refrigeration subsoil and superheat
• Calculate the combustion efficiency

Using the Kane 460 Flue Gas Analyser users are able to measure a number of fuel types including: Natural Gas, LPG, Butane, Propane, Light Oil, Heavy Oil and plus user fuels. Over 40 refrigerants can be detected including R22, R32, R134a, R290 and R410A.

The Kane 460 is protected from vapour damage thanks to the Hydrophobic water trap and a protective rubber sleeve and Kane backpack offers further protection when on site or in transport. 

The ASP3 kit including within the CPA kit is an appliance sampling probe kit suitable for grills, gas fires & general purpose. With a 5mm diameter/2.2m flexible tube and separate handle & hose assembly for ease of use. The Kane GLD/450plus gas leak detector can detect combustible gases and other fluids with concentrations as small as 50ppm detectable.

Kane IRP-3 Infra-Red Printer

The Kane 460 CPA kit 2 includes the Kane IRP-3 Infrared Printer allowing users to print hard copies of test results and measurements via a wireless infrared data transfer. Powered by rechargeable batteries, the IRP3 uses thermally sensitive paper rather than ink or ribbons. The user friendly printer provides a simple and easy way to print results when carrying out inspections using the Kane 460 Flue Gas Analyser.

Kane Link

KANE 460 Flue Gas Analyser can be wirelessly connected to any compatible Kane product that also features Kane Link, allowing users to further use their Kane 460 Flue Analyser to test A/C units, Kitchen fans, heating systems and more the used alongside a compatible Kane Link instrument.

Kane Live App

Kane Live is downloaded on both Android and iOS compatible devices. Using the App users are able connect their Kane 460 analyser to view test results and also email reports to customers or colleagues with data logged as CSV files. Test locations can be logged using GPS and customisable personal notes can also be added to test results.

Kane 460 Flue Gas Analyser Comparison table

The KANE 460 HVACR, Heating, Cooling, Refrigeration and IAQ Analyser is available as a stand alone instrument or a part of a kit. The table below shows the contents of each available kit. 

Key Features

• Temperature inlet/flue gas, differential pressure/ambient
• High accuracy differential pressure meter +/- 160mba
• Install, commission, and service boilers, heat pumps, AC and refrigeration systems without the need for a manifold or hose
• 2psi/160 mbar pressure sensor allows for Flue draught, system and tightness tests to be performed
• Over 40 refrigerants can be detected including R22, R32, R134a, R290 and R410A
• Measure a number of gases including Natural Gas, LPG, Butane, Propane, Light Oil, Heavy Oil and plus user fuels
• CO 0-10,000 ppm H2 compensated with over range protection
• O2 0-21%
• NO 0-5,000ppm (option)
• Temperature inlet/flue gas, differential pressure/ambient
• High accuracy differential pressure meter +/- 160mba
• Calculate CO2 0-99%
• Calculate the CO/CO2 ratio
• Excess air
• A/C and refrigeration subsoil and superheat
• Calculate the combustion efficiency
• Kane Live compatability
• Kane Link compatible
• Kane Care 5 Year Service Plan (optional)
• Kane Backpack for easy storage and transportation
• Kane IRP3 printer for wireless printing even in the field
• Kane-GLD combustible gas leak detector
• KAL1 general purpose temp probe
• 2 x Wireless clamp-on proves
• ASP3 kit: cooker, fire and grill appliance testing probes