KANE 460 Flue Gas Analyser with PRO Kit 2

KANE 460 Flue Gas Analyser with PRO Kit 2

The KANE 460 Flue Gas Analyser with PRO Kit 2 features several useful accessories including a Kane KAL1 air liquid temperature probe and a Kane GLD/450plus gas leak detector that can detect combustible gases and other fluids, concentrations as small as 50ppm can be detected. Two Kane KPCP clamp-on temperature probes allows the user to take flow and return temperature readings. The analyser and all supplied accessories can be stored in the provided backpack provided

KANE 460 Flue Gas Analyser

The KANE 460 Flue Gas Analyser is suitable for the installation, commissioning and servicing of boilers, heat pumps, A/C and refrigeration systems. The testing of domestic and commercial heating and water systems and safety checks to determine if there is CO present in a room or round an appliance. The Kane 460 allows for the sweep and CO migration tests to be performed when commissioning a boiler, as well as measuring a building IAQ and ventilation. Flue draught, system and tightness tests can also be performed with the Kane 460.

The Kane 460 provides users with a number of test readings that it can calculate and measure a wider range of applications including:

• CO 0-10,000 ppm H2 compensated with over range protection
• O2 0-21%
• NO 0-5,000ppm (option)
• Temperature inlet/flue gas, differential pressure/ambient
• High accuracy differential pressure meter +/- 160mba
• Calculate CO2 0-99%
• Calculate the CO/CO2 ratio
• Excess air
• A/C and refrigeration subsoil and superheat
• Calculate the combustion efficiency

The Kane 460 is a user-friendly instrument that is easy to transport and operate. It features a large, backlit display and a simple menu system. The Kane 460 is protected from vapour damage thanks to the Hydrophobic water trap and a protective rubber sleeve offers further protection when on site or in transport.

Using the Kane 460 Flue Gas Analyser users are able to measure a number of fuel types including: Natural Gas, LPG, Butane, Propane, Light Oil, Heavy Oil and plus user fuels. Over 40 refrigerants can be detected including R22, R32, R134a, R290 and R410A.

Kane IRP-3 Infra-Red Printer

The Kane 460 Pro kit includes the Kane IRP-3 Infrared Printer which allows users to print hard copies of test results and measurements via a wireless infrared data transfer. Powered by rechargeable batteries, the IRP3 uses thermally sensitive paper rather than ink or ribbons. The user friendly printer provides a simple and easy way to print results when carrying out inspections using the Kane 460.

Kane Link

The KANE 460 Flue Gas Analyser is compatible with Kane Link allowing users to wirelessly connect to any compatible Kane product that also features the Kane Link function, allowing the operator to perform more testing such as balance heating systems, check A/C units or kitchen fans, test for CO and more. Using Kane Link users are able to gather all information on the same device.

Kane Live App

Users are able to download the Kane Live App available on both Android and iOS devices, allowing for quick connection to their analyser to log, store and transfer data all in one place. Real time test data with GPS location can also be saved and documented. PDF reports and certificates can be generated whilst test results can also be sent in CSV format for spreadsheets.

Kane 460 Flue Gas Analyser Comparison table

The KANE 460 HVACR, Heating, Cooling, Refrigeration and IAQ Analyser is available as a stand alone instrument or a part of a kit. The table below shows the contents of each available kit. 

Key Features

• Temperature inlet/flue gas, differential pressure/ambient
• High accuracy differential pressure meter +/- 160mba
• Install, commission, and service boilers, heat pumps, AC and refrigeration systems without the need for a manifold or hose
• 2psi/160 mbar pressure sensor allows for Flue draught, system and tightness tests to be performed
• Over 40 refrigerants can be detected including R22, R32, R134a, R290 and R410A
• Measure a number of gases including Natural Gas, LPG, Butane, Propane, Light Oil, Heavy Oil and plus user fuels
• CO 0-10,000 ppm H2 compensated with over range protection
• O2 0-21%
• NO 0-5,000ppm (option)
• Temperature inlet/flue gas, differential pressure/ambient
• High accuracy differential pressure meter +/- 160mba
• Calculate CO2 0-99%
• Calculate the CO/CO2 ratio
• Excess air
• A/C and refrigeration subsoil and superheat
• Calculate the combustion efficiency
• Kane Live
• Kane Link
• Kane Care 5 Year Service Plan (optional)
• Kane Backpack for easy storage and transportation
• Kane IRP3 printer for wireless printing even in the field
• Kane-GLD combustible gas leak detector
• KAL1 general purpose temp probe
• 2 x Wireless clamp-on proves